Piercing the surface: A mechanical analysis of stabbing with household tools

Estimating the applied power during a stabbing incident, or estimating the minimal force necessary to penetrate the body with a certain weapon is a challenging task in forensic practice. A thorough forensic evaluation of stabbing forces needs objective numerical experimental data. Stabbing tests of 12 different weapons – including knives, a pair of scissors, a fork, screwdrivers, a rasp, a corkscrew, and a utility knife blade – were performed with a Mecmesin MultiTest-dV material tester on pork loin and ballistic gel to estimate the stabbing forces and dynamics. Penetration force (F_p) and maximal force (F_max) were recorded, and the registered force curves were analyzed. F_max was 159.8–212.07 Newton (N), 30.56–30.58 N, 168.9–185.48 N for various knives; 171.39–190.43 N for the pair of scissors, 233.6 N for the fork; 532.65–562.65 N, 370.31–367.19 N and 314.51–432.89 N for various screwdrivers, 44.14–56.62 N for utility knife during pork loin stabbing. The butter knife, corkscrew and rasp were not able to penetrate the pork loin, and the curved fork bent during stabbing. The results prove that weapon characteristics greatly influence the force necessary for penetration. Maximal stabbing force depends mostly on tip sharpness, and the force sharply decreases after penetration occurs, which indicates that edge sharpness is not as important as tip characteristics during stabbing perpendicular to skin surface. The penetration force during stabbing with a pair of scissors is comparable to the penetration force of knives. Stabbing with screwdrivers generally needs larger force than average knives but depends greatly on screwdriver size.     

Fatal intoxication involving 2-methyl AP-237

Novel synthetic opioids contribute considerably to the opioid epidemic, especially with the frequent emergence of structurally similar compounds. This case report describes a fatal intoxication involving 2-methyl AP-237. A 54-year-old Caucasian male was found deceased from an apparent drug overdose. A plastic container labeled “2MAP” and a cut straw were found in the decedent's backpack at the scene. A white substance found in the container tested positive for fentanyl by field testing. According to his medical history, the decedent was treated for a drug overdose 3 years prior to his death. With no diagnostic findings at autopsy, the case was submitted for toxicological analysis. An unknown substance was detected in peripheral blood and urine using gas chromatography with nitrogen phosphorous detection (GC-NPD). Further testing was conducted using gas chromatography–mass spectrometry (GC–MS) and liquid chromatography-quadrupole-time-of-flight mass spectrometry (LC-QTOF-MS) which confirmed the presence of 2-methyl AP-237 and potential metabolites in blood and urine. Quantitation by GC-NPD revealed concentrations of 2-methyl AP-237 in blood and urine at 480 ng/mL and 4200 ng/mL, respectively. The toxicological analysis also identified and quantitated alprazolam in the blood at 55 ng/mL. Additionally, the metabolism of 2-methyl AP-237 was investigated and three hydroxylated metabolites were identified in peripheral blood and urine. Limited literature is available for the detection and quantitation of 2-methyl AP-237 in postmortem specimens. Given the toxicological findings with unremarkable autopsy findings, this case is an example of a fatal intoxication involving 2-methyl AP-237.     

Pulp volume quantification methods in cone-beam computed tomography for age estimation: A critical review and meta-analysis

The secondary dentin deposition that occurs after the tooth formation process results in a decrease in pulp cavity volume in adolescents and adults. The purpose of this critical review was to correlate pulpal and/or dental volume on cone-beam computed tomography (CBCT) with chronological age approximation. A subobjective was to investigate which methodology and CBCT technical parameters would be most appropriate to evaluate this correlation. This critical review followed the PRISMA guidelines, and it was conducted by a search through PubMed, Embase, SciELO, Scopus, Web of Science, Cochrane Library databases, as well as gray literature. Primary studies that used pulp volume, or pulp chamber to tooth volume ratio measured using CBCT were included. Seven hundred and eight indexed and 31 non-indexed records were identified. A qualitative analysis was performed including 25 selected studies with a total of 5100 individuals, age ranging from 8 to 87 years without sex predilection. The most used method was pulp volume/tooth volume. CBCT voxel size ranged between 0.09 and 0.5. Manual segmentation associated with threshold algorithms was used in most of the studies. Correlation between the pulp volume/tooth volume ratio was moderate: −0.66 for the upper central incisors, −0.59 for upper canines and −0.56 for lower canines. High heterogeneity was observed among the studies. It is concluded that pulp volume should be used with caution in age estimation. Evidence supports the preferable use of upper incisors with pulp volume/tooth volume ratio for age estimation. There is not enough evidence that voxel size interferes in age estimation by pulp volume.     

Fatal exsanguination following complete transection of femoral vessels due to angle grinder injury in an industrial accident

Angle grinders are one of the most dangerous and frequently used tools in industrial settings. Angle grinder injuries range from superficial cuts to deep penetrating injuries with underlying fracture-dislocation and vascular trauma. The injuries caused by angle grinders mostly involve the head, face, or upper limbs, while the lower limb is an unusual site. The high-speed rotating disc of the angle grinders does not respect anatomical boundaries or structures; therefore, the injuries caused may be disfiguring, permanently incapacitating, or even fatal. We report a fatal case of an angle grinder injury to the lower limb. The victim sustained a sharp cut over the left thigh while woodworking in an industrial setup. The rotating disc of an angle grinder had transected the skin, subcutaneous fat and muscles, and both the femoral vessels of the left side, which led to fatal exsanguination within 10 min of the incident.     

Homicide by unusual‐edged weapons: Forensic considerations of two cases

Homicide by stab wound is common worldwide. However, the use of unusual edged weapons is rarely reported in the forensic literature. Here, we report two cases of homicide involving a Japanese sword, or katana, and a sickle. Both of these weapons can create either stab or incised wounds with some particularities. In our cases, characteristics of the external wounds, internal injuries, and the depth of penetration raised the possibility of an unusual weapon. Meticulous forensic examination of these injuries (morphological characteristics, depth of penetration, trajectories, and cut marks in the bone) may allow the forensic expert to determine the type of weapon used.     

Identification of furosemide in hair in a post‐mortem case by UHPLC‐MS/MS with guidance on interpretation

Testing for drugs in hair raises several difficulties. Among them is the interpretation of the final concentration(s). In a post‐mortem case, analyses revealed the presence of furosemide (12 ng/mL) in femoral blood, although it was not part of the victim's treatment. The prosecutor requested our laboratory to undertake an additional analysis in hair to obtain information about the use of furosemide. A specific method was therefore developed and validated to identify and quantify furosemide in hair by UHPLC‐MS/MS. After decontamination of 30 mg of hair, incubation in acidic condition, extraction with ethyl acetate, the samples were analyzed by UHPLC‐MS/MS. Furosemide was found in the victim's hair at 225 pg/mg. However, it was not possible to interpret this concentration due to the absence of data in the literature. Therefore, the authors performed a controlled study in two parts. In order to establish the basis of interpretation, several volunteers were tested (four after a single 20 mg administration and twenty‐four under daily treatment). The first part indicated that a single dose is not detectable in hair using our method. The second part demonstrated concentrations ranging from 5 to 1110 pg/mg with no correlation between dosage and hair concentrations. The decedent's hair result was interpreted as repeated exposures. In the case of furosemide analysis, hair can provide information about its presence but cannot give information about dosage or frequency of use.     

Fatal intoxication with 1,4-butanediol: Case report and comprehensive review of the literature

A fatal case of 1,4-butanediol (1,4-BD) oral ingestion is reported here, in which a 51-year-old man was found dead in his bed. According to the police report, the deceased was a known drug user. A glass bottle labeled (and later confirmed to be) “Butandiol 1,4” (1,4-BD) was found in the kitchen. Furthermore, the deceased's friend stated that he consumed 1,4-BD on a regular basis. The autopsy and histological examination of postmortem parenchymatous organ specimens did not revealed a clear cause of death. Chemical-toxicological investigations revealed gammahydroxybutyrat (GHB) in body fluids and tissues in the following quantities: femoral blood 390 mg/L, heart blood 420 mg/L, cerebrospinal fluid 420 mg/L, vitreous humor 640 mg/L, urine 1600 mg/L, and head hair 26.7 ng/mg. In addition, 1,4-BD was qualitatively detected in the head hair, urine, stomach contents, and the bottle. No other substances, including alcohol, were detected at pharmacologically relevant concentrations. 1,4-BD is known as precursor substance that is converted in vivo into GHB. In the synoptic assessment of toxicological findings, the police investigations and having excluded other causes of death, a lethal GHB-intoxication following ingestion of 1,4-BD, can be assumed in this case. Fatal intoxications with 1,4-BD have seldom been reported due to a very rapid conversion to GHB and, among other things, non-specific symptoms after ingestion. This case report aims to give an overview to the published of fatal 1,4-BD-intoxications and to discuss the problems associated with detection of 1,4-BD in (postmortem) specimens.